How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of unique steps to add a second ignition key. It requires dealer assistance using an electronic handheld computer called Tech-2. Then, a new transponder and key have to be purchased.
Rotate your keys to stop one from deteriorating faster than the other. This will help to keep your keys in good condition.
Replacement Case
As opposed to the traditional Saab keys of old keys, the latest key fobs have electronics inside which makes it difficult to create a duplicate. This has made stealing car keys much more difficult than it was twenty years ago. It also makes it more costly to replace keys that were lost.
Saab 9-3 owners must have two working keys. It costs a fortune to replace a lost key because it requires replacing the CIM module, as well as changing the locking cylinders. Dealers typically charge between $100 and $200 to do this.
There are ways to cut down on the high cost. Some parts suppliers will look up the code from a spare key (usually the same one that opens the doors and turns on the ignition) and cut a brand new key blade out of metal for just a fraction of dealer cost. The key must, however, be identical to the original one in order to function in your car.
You can also change the case yourself by following these steps. You'll require an open-faced screwdriver and patience. With the screwdriver, pry off the plastic and then remove the emergency key. Once the case has been opened, remove all electronics and put them in the new case. Put the correct key and badge inside the case.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost part that can be replaced quickly and easily. This video tutorial on DIY from YouTube Cyclone Cyd shows how to replace the battery for the remote key fob in just four steps. This tutorial should work for any modern saab key fob, however the procedure might differ slightly.
The first step is to find the button that opens the backup key on the fob. This is usually located near the Saab logo on the back of the fob. Then you will need a flathead screwdriver to insert into the tiny hole in this button. This should be enough to open the fob's case so that you can replace the battery.
Once the new CR1632 battery is in place then you can reassemble your remote key fob, and then program it to your car. The entire process shouldn't take more than an hour. It is a simple process that does not require any special equipment.
The process is more complicated if you've lost your key, but it's possible. The dealer has to determine the VIN of the car and then request a replacement key blade and TWICE module that has the proper unique code. Then, they'll have to cut the replacement key and then program it using a brand new tool for programming called MDI.
Replacement Key Fob
The key fob has an internal battery that is used to lock and unlock your car. Batteries have a limited lifespan and will eventually fail. This is a problem that happens with all cars, and the good news is that you can replace the batteries in most key fobs without replacing the entire case. You can purchase replacement fobs on Amazon that include all the electronics already installed, which means you can just pop open the case and replace the batteries that were in the case. You'll need to take out the emergency key before you can replace the batteries. To do saab keys replacement thekeylab.co.uk , insert an small screwdriver with a flat head into the slot in the middle of the. Use the screwdriver to move around the case, and it will split open, making it much easier to take it out.
If you're planning to replace your keys, keep a spare available. This will save you lots of money. If you have a spare you can ask the dealer to cut an entirely new key and then program it to the car, which is cheaper than replacing the whole key fob.
It is possible to add a second key to your car in the event that you don't have one, but it takes a great deal of research and work. It costs around a hundred bucks to add an additional car key. The computer of the car also needs to be programmed. This can be done by a professional, but it is an expensive option for most owners.
Replacement Ignition
The latest SAAB 9-3 uses an alarm system that is more sophisticated based on a key code. This means that if you lose your only working key, acquiring an additional one could be extremely costly since the car needs to have a special computer module added and it also must be specially programmed to accept an additional key. Most locksmiths can't do this or even a dealer will charge several hundred dollars to program the new key!
If you've lost only one working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) in order to make a replacement, and they will charge a premium for it. We can reprogram the existing EEPROM on your car's computer to be ready to accept an additional key. This will save you more than 50% of the price you'd pay a dealer.
If you've been a long time owner of an 03-11 SAAB 9-3, then you likely are aware that the ignition key isn't the most durable. They can become incredibly sticky, and the buttons can fall off occasionally and you should think about purchasing a new one if yours isn't performing as it should. Luckily, replacing the ignition key isn't as difficult as it seems and can be done fairly quickly with the appropriate tools.